{"id":1895,"date":"2025-05-28T19:28:37","date_gmt":"2025-05-28T11:28:37","guid":{"rendered":"https:\/\/www.smac.com.cn\/?page_id=1895"},"modified":"2025-05-28T19:57:49","modified_gmt":"2025-05-28T11:57:49","slug":"transformer-production-line","status":"publish","type":"page","link":"https:\/\/www.smac.com.cn\/index.php\/transformer-production-line\/","title":{"rendered":"Transformer Production Line"},"content":{"rendered":"\t\t
\n\t\t\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Transformer Production Line<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Transformer Production Line<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

3D Wound Core Manufacture Machine \/ A morphous Alloy Core Manufacture Machine \/ Silicon Steel Cutting Machine<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
<\/div>\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Three-dimensional Triangle Wound Core Structure and Advantages<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Optimization of magnetic circuit :\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

1.There is no joint between the three dimensional volume of the core layer, uniform distribution of the magnetic circuit. There is no obvious high resistance area and no distortion of the magnetic flux density of the joint.<\/p>

2.The direction of the magnetic flux is completely consistent with the orientation of the silicon steel sheet.<\/p>

3.The length of the three-phase magnetic circuit is exactly the same, and the length of the three-phase magnetic circuit is the shortest.<\/p>

4.The three-phase magnetic circuit is completely symmetrical, and the three air current is completely balanced.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Low loss, energy savings remarkable:\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

1. Lower Core Loss: Aligned magnetization and uniform flux distribution reduce iron loss by 10-20%.<\/p>

2.Material Savings: Special 3D structure cuts yoke material by 25%, with corner core weight only 6%.<\/p>

3.Improved Magnetic Performance: High-temperature annealing enhances silicon steel’s magnetic properties beyond factory specifications.<\/p>

4.Superior No-Load Performance: No-load loss is 25-35% lower than national standards, and max load current can be cut by 92%.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Low noise:\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

The source of noise caused by transformer body vibration is:<\/p>

1.Magnetic expansion of the silicon steel sheet causes core vibration, producing noise.<\/p>

2.Electromagnetic attraction at joints and laminations due to leakage causes core vibration and noise.<\/p>

3.Excessively high working magnetic density near saturation, along with large leakage, results in noise.<\/p>

The three-dimensional wound core, made from continuously rolled silicon steel without seams, avoids the noise of laminated cores. Its symmetrical three-phase magnetic circuit and well-designed magnetic density significantly reduce noise.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

High overload ability:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

1.The product itself has very low heat: the winding core transformer’s no-load loss, no-load current are both very small, so the product itself is very low heated.<\/p>

2.Three-phase coil is like three chimney delta shaped, so an airway chimney is formed in the coil. The core yoke has a temperature difference of 30-40\u2103, which causes strong cross-ventilation. Cold air goes up to the warm side, the heat is radiated from the inner bevel of upper yoke.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Compact structure, small location :\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

The special-designed three-dimensional core makes compact structure products reasonable layout, the transformer body occupied is 10-15% less than traditional products, body height 10-20%. If installed in the substation box, the substation box can deduce nearly 1\/4.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Anti-theft :<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

The copper coil is wounded onto the iron. The copper coil is hard to taken out without big professional equipment<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
Rated capacity\uff08KAV\uff09<\/td>Voltage\u00a0combination and tapping range<\/td>Connection group symbol<\/td>No-load loss<\/td>No-load current<\/td>load loss<\/td>

\u00a0<\/p>

short circuit impedance%<\/p><\/td><\/tr>

\u00a0<\/p>

High voltage KV<\/p><\/td>

High voltage tapping range%<\/td>

\u00a0<\/p>

Low voltage KV<\/p><\/td>

S13<\/td>S11<\/td><\/tr>
30<\/td>

6<\/p>

6.3<\/p>

10<\/p>

10.5<\/p>

11<\/p><\/td>

\u00b15<\/td>0.4<\/td>Dyn11 Yzn11 Yyn0<\/td>80<\/td>100<\/td>0.30<\/td>630\/600<\/td>4.0<\/td><\/tr>
50<\/td>100<\/td>130<\/td>0.24<\/td>910\/870<\/td><\/tr>
63<\/td>110<\/td>150<\/td>0.23<\/td>1090\/1040<\/td><\/tr>
80<\/td>130<\/td>180<\/td>0.22<\/td>1310\/1250<\/td><\/tr>
100<\/td>150<\/td>200<\/td>0.21<\/td>1580\/1500<\/td><\/tr>
125<\/td>170<\/td>240<\/td>0.20<\/td>1890\/1800<\/td><\/tr>
160<\/td>200<\/td>280<\/td>0.19<\/td>2310\/2200<\/td><\/tr>
200<\/td>240<\/td>340<\/td>0.18<\/td>2730\/2600<\/td><\/tr>
250<\/td>290<\/td>400<\/td>0.17<\/td>3200\/3050<\/td><\/tr>
315<\/td>340<\/td>480<\/td>0.16<\/td>3830\/3650<\/td><\/tr>
400<\/td>410<\/td>570<\/td>0.16<\/td>4520\/4300<\/td><\/tr>
500<\/td>480<\/td>680<\/td>0.16<\/td>5410\/5150<\/td><\/tr>
630<\/td>

Dyn11<\/p>

Yyn0<\/p><\/td>

570<\/td>810<\/td>0.15<\/td>6200<\/td>4.5<\/td><\/tr>
800<\/td>700<\/td>980<\/td>0.15<\/td>7500<\/td><\/tr>
1000<\/td>830<\/td>1150<\/td>0.14<\/td>10300<\/td><\/tr>
1250<\/td>970<\/td>1360<\/td>0.13<\/td>12000<\/td><\/tr>
16000<\/td>1170<\/td>1640<\/td>0.12<\/td>14500<\/td><\/tr><\/tbody><\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
Note:<\/strong> <\/span>For transformers with rated capacity of 500KVA and below, the load loss values \u200b\u200babove the slash in the table are applicable to Dyn11 and Yzn11 connection groups, and the load loss values \u200b\u200bbelow the slash are applicable to Yyn0 connection groups.<\/span><\/pre>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Three - dimensional Transformer Wound Core Cutting Machine<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Features :<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
1.<\/strong> <\/span>Apply to silicon steel strip cutting for the three-dimensional triangle wound core<\/p>
2.<\/strong> <\/span>Cutting type: curve\/ straight<\/p>
3.<\/strong> <\/span>Adopt servo motor, PLC control system and touch screen.<\/p>
4.<\/strong> <\/span>It has functions like: automatic resetting, automatic adjusting-tool, automatic shutdown, strip parameter setting and real-time display.<\/p>
5.<\/strong> <\/span>It is equipped with a variable frequency feeder, material\u2019s position photoelectric detection, no need of storage pit, synchronous operation of feeding speed and cutting speed.<\/p>
6.<\/strong> <\/span>It is equipped with a torque receiver. It makes the constant tension of torque operate with the cutting machine synchronously. Material receiving neatly and closely.<\/p>
7.<\/strong> <\/span>The machine adopts high precision ball screw, and precision guide to ensure smooth operation, low noise, and long lifetime.<\/p>
8.<\/strong> <\/span>Hob uses high quality alloy steel, fast and easy to equip the cutter. It is available for different thickness material.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t\t\t\n\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\tReverse Machine\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t<\/a>\n\t\t\t\t\t\t\t\n\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\tWorkpiece Tray\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t<\/a>\n\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Technical Parameters:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\n\n\n\n\n\n\n\n\n\n\n
Code<\/td>\nSHKL-400<\/td>\n<\/tr>\n
Cutting type<\/td>\nstraight \/ curve<\/td>\n<\/tr>\n
Max feeding width<\/td>\n400MM<\/td>\n<\/tr>\n
Cutting speed<\/td>\n0-60M\/min<\/td>\n<\/tr>\n
Cutting method<\/td>\ncut one into two strip<\/td>\n<\/tr>\n
Material utilization<\/td>\n99%<\/td>\n<\/tr>\n
Cutting accuracy<\/td>\n\u00b10.3MM<\/td>\n<\/tr>\n
Cutting burr<\/td>\n\u22640.03MM<\/td>\n<\/tr>\n
Speed adjusting way<\/td>\nstepless speed adjust<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Automatic Three-dimensional Wound Core Winding Machine<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Features :<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
1.<\/strong> <\/span>Apply to closed type wound core<\/p>
2.<\/span> <\/strong>Function: the machine could use for flat single phase, flat three-phase and three\u0002dimensional wound core.<\/p>
3.<\/span> <\/strong>Widely use, it could meet a variety of cross section<\/p>
4.<\/span> <\/strong>Adopt servo motor, PLC control system and touch screen.<\/p>
5.<\/span> <\/strong>It has functions like: automatic resetting, automatic shutdown, strip parameter setting and real-time display.<\/p>
6.<\/span> <\/strong>It has manual and automatic pressure regulating device, easy to operate.<\/p>
7.<\/span> <\/strong>The wire guided machine adopts high precision ball screw, and precision guide to ensure smooth operation, low noise, and long lifetime.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Technical Parameters:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\n\n\n\n\n\n\n\n\n\n
Code<\/td>\nSHJR-1200<\/td>\n<\/tr>\n
Maximum\u00a0core\u00a0outer\u00a0diameter<\/td>\n300MM<\/td>\n<\/tr>\n
Maximum\u00a0gyration\u00a0diameter<\/td>\nAdd\u00a0clamping\u00a0roller<\/td>\nR600MM<\/td>\n<\/tr>\n
 <\/td>\nNo\u00a0clamping\u00a0roller<\/td>\nR800MM<\/td>\n<\/tr>\n
Core\u00a0winding\u00a0speed<\/td>\n0-60r\/min<\/td>\n<\/tr>\n
Total\u00a0Power<\/td>\n7.5KW<\/td>\n<\/tr>\n
Speed\u00a0adjusting\u00a0way<\/td>\nFrequency\u00a0conversion\u00a0stepless\u00a0speed\u00a0adjust<\/td>\n<\/tr>\n
Control\u00a0system<\/td>\nPLC,\u00a0Touch\u00a0screen<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
R-type Wound Core Automatic Winding Machine<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Features :<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
1.<\/strong> <\/span>Apply to closed type wound core.<\/p>
2.<\/strong> <\/span>Function: the machine could use for flat single phase, flat three-phase and three\u0002dimensional wound core.<\/p>
3.<\/strong> <\/span>Widely use, it could meet a variety of cross section.<\/p>
4.<\/strong> <\/span>Adopt servo motor, PLC control system and touch screen.<\/p>
5.<\/strong> <\/span>It has functions like: automatic resetting, automatic shutdown, strip parameter setting and real-time display.<\/p>
6.<\/strong> <\/span>It has manual and automatic pressure regulating device, easy to operate.<\/p>
7.<\/strong> <\/span>The wire guided machine adopts high precision ball screw, and precision guide to ensure smooth operation, low noise, and long lifetime.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Technical Parameters:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
Code<\/td>SHPMJR-<\/td><\/tr>
Maximum\u00a0core\u00a0outer\u00a0diameter<\/td>300MM<\/td><\/tr>
Maximum\u00a0gyration\u00a0diameter<\/td>Add\u00a0clamping\u00a0roller<\/td>R600MM<\/td><\/tr>
\u00a0<\/td>No\u00a0clamping\u00a0roller<\/td>R800MM<\/td><\/tr>
Core\u00a0winding\u00a0speed<\/td>0-45r\/min<\/td><\/tr>
Total Power<\/td>9.5KW<\/td><\/tr>
Speed\u00a0adjusting\u00a0way<\/td>Frequency\u00a0conversion\u00a0stepless\u00a0speed\u00a0adjust<\/td><\/tr>
Control\u00a0system<\/td>PLC,\u00a0Touch\u00a0screen<\/td><\/tr><\/tbody><\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Three-dimensional Wound Core Coil Winding Machine (Big)<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Features :<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
1.<\/strong> <\/span>Dedicated for three-dimensional triangle wound core winding machine<\/p>
2.<\/strong> <\/span>Positioning mode: inner positioning, running smoothly, low noise, safe and reliable<\/p>
3.<\/strong> <\/span>The machine adopts electric lifting mode to adjust the core position, easy and fast<\/p>
4.<\/strong> <\/span>PLC control system, touch screen, encoder counting, automatic shutdown, memory and learning function<\/p>
5.<\/strong> <\/span>Be equipped with a inner top device, convenient and efficiency to install the core.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Technical Parameters:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\n\n\n\n\n\n\n\n\n
Code<\/td>\nSHRX-1<\/td>\n<\/tr>\n
Suitable\u00a0transformer\u00a0capacity<\/td>\n30~1250kVA<\/td>\n<\/tr>\n
Winding\u00a0method<\/td>\nHorizontal\u00a0type<\/td>\n<\/tr>\n
Up\u00a0and\u00a0down\u00a0distance<\/td>\n200MM<\/td>\n<\/tr>\n
Front\u00a0and\u00a0back\u00a0max\u00a0distance<\/td>\n250MM<\/td>\n<\/tr>\n
Drive\u00a0gear\u00a0revolving\u00a0speed<\/td>\n0-300r\/min<\/td>\n<\/tr>\n
Control\u00a0system<\/td>\nPLC,\u00a0Touch\u00a0screen<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Three-dimensional Wound Core Coil Winding Machine (Small)<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Features :<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
1.<\/strong> <\/span>Dedicated for three-dimensional triangle wound core winding machine<\/p>
2.<\/strong><\/span> Positioning mode: inner positioning, running smoothly, low noise, safe and reliable<\/p>
3.<\/strong> <\/span>PLC control system, touch screen, encoder counting, automatic shutdown, memory and learning function<\/p>
4.<\/strong> <\/span>Be equipped with a inner top device, convenient and efficiency to install the core.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Technical Parameters:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\n\n\n\n\n\n\n\n\n
Code<\/td>\nSHRX-2<\/td>\n<\/tr>\n
Suitable\u00a0transformer\u00a0capacity<\/td>\n30-630KVA<\/td>\n<\/tr>\n
Winding\u00a0method<\/td>\nHorizontal\u00a0type<\/td>\n<\/tr>\n
Up\u00a0and\u00a0down\u00a0distance<\/td>\n500MM<\/td>\n<\/tr>\n
Front\u00a0and\u00a0back\u00a0max\u00a0distance<\/td>\n250MM<\/td>\n<\/tr>\n
Drive\u00a0gear\u00a0revolving\u00a0speed<\/td>\n0-300r\/min<\/td>\n<\/tr>\n
Control\u00a0system<\/td>\nPLC,\u00a0Touch\u00a0screen<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Tension Wire Pay Off Stand<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
HV Tension Wire Pay Off Stand<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
1.<\/strong> <\/span>Adopt magnetic powder clutch, suitable for coil winding. It has constant tension.<\/p>
2.<\/strong><\/span> The machine has two functions: uncoil and taking up.<\/p>
3.<\/strong><\/span> Easy to operate.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\n\n\n\n\n\n\n\n
Code<\/td>\nSHZL-50N<\/td>\n<\/tr>\n
Code<\/td>\nSHZL-100N<\/td>\n<\/tr>\n
Max\u00a0Load\u00a0capacity<\/td>\n100kg<\/td>\n<\/tr>\n
Tray\u00a0height<\/td>\n\u2264400MM<\/td>\n<\/tr>\n
Tray\u00a0diameter<\/td>\n\u2264500MM<\/td>\n<\/tr>\n
Moving\u00a0length<\/td>\n\u2264800MM<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
LV Tension Wire Pay Off Stand <\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
1.<\/strong> <\/span>Apply to LV coil winding.<\/p>
2.<\/strong> <\/span>Adopt pneumatic brake, tension could be adjusted according to air pressure.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
Code<\/td>SHZL-4<\/td><\/tr>
Max\u00a0Load\u00a0capacity<\/td>200kg<\/td><\/tr>
Tray\u00a0height<\/td>\u2264400MM<\/td><\/tr>
Tray\u00a0diameter<\/td>\u2264600MM<\/td><\/tr><\/tbody><\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Horizontal Coil Winding Machine<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Application :<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
This equipment is used for coil winding of transformer and reactor<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Features :<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
1.<\/strong><\/span>Winding uses frequency conversion stepless speed adjusting, starting and braking smoothly<\/p>
2.<\/strong><\/span>Adopting PLC and touch screen control, it could can preset number of winding. Max presetting number is 20.<\/p>
3.<\/strong><\/span>Adopting encoder counting, touch screen display, it could remember in power off and has exact counting function in positive and reverse winding.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Technical Parameters:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\n\n\n\n\n\n\n\n\n\n
Code<\/td>\nSH-0.5T<\/td>\nSH-1T<\/td>\nSH-2T<\/td>\nSH-3T<\/td>\nSH-5T<\/td>\nSH-10T<\/td>\n<\/tr>\n
Max.\u00a0Loading<\/td>\n0.5T<\/td>\n1T<\/td>\n2T<\/td>\n3T<\/td>\n5T<\/td>\n10T<\/td>\n<\/tr>\n
Main\u00a0axis\u00a0rotating\u00a0speed<\/td>\n0-240r\/min<\/td>\n0-150r\/min<\/td>\n0-90r\/min<\/td>\n0-60r\/min<\/td>\n0-20r\/min<\/td>\n0-10r\/min<\/td>\n<\/tr>\n
Speed\u00a0adjusting\u00a0method<\/td>\nStepless\u00a0speed\u00a0adjust<\/td>\n<\/tr>\n
Main\u00a0axis\u00a0center\u00a0height<\/td>\n850mm<\/td>\n850mm<\/td>\n1000mm<\/td>\n1100mm<\/td>\n1300mm<\/td>\n1400mm<\/td>\n<\/tr>\n
Max.\u00a0distance\u00a0between\u00a0main\u00a0axis\u00a0and\u00a0end\u00a0seat<\/td>\n1200mm<\/td>\n1500mm<\/td>\n2000mm<\/td>\n2500mm<\/td>\n3000mm<\/td>\n3500mm<\/td>\n<\/tr>\n
End\u00a0seat\u00a0moving\u00a0stroke<\/td>\n0-600m<\/td>\n0-750m<\/td>\n0-1000m<\/td>\n0-1200m<\/td>\n0-1500m<\/td>\n0-1500m<\/td>\n<\/tr>\n
Main\u00a0axis\u00a0power<\/td>\n3kw<\/td>\n4kw<\/td>\n5.5kw<\/td>\n7.5kw<\/td>\n11kw<\/td>\n15kw<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Automatic Cabling Coil Winding Machine<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Application :<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
This equipment is used for amorphous alloy transformer HV coil winding and the same art work transformer coil winding.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Features :<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
1.<\/strong><\/span>Apply to round , oval , rectangle shape coil winding<\/p>
2.<\/strong><\/span>Adopting PLC control , touch screen human – machine interface<\/p>
3.<\/strong><\/span>Automatic cabling device is servo motor driving, precise ball screw and line guide as direction guide<\/p>
4.<\/strong><\/span>Wire supplying use cylinder buffering structure, oval and rectangle coil winding problem can be solved effectively.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Equipment Composition:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
1.<\/strong> <\/span>Main machine<\/p>
2.<\/strong> <\/span>Automatic cabling device<\/p>
3.<\/strong> <\/span>Interlayer insulation paper device<\/p>
4.<\/strong> <\/span>Wire supplying race<\/p>
5.<\/strong><\/span> Control system<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Technical Parameters:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\n\n\n\n\n\n\n\n\n\n\n\n\n
Code<\/td>\nSH-600<\/td>\nSH-800<\/td>\nSH-1000<\/td>\n<\/tr>\n
Coil\u00a0height<\/td>\n\u2264600mm<\/td>\n\u2264800mm<\/td>\n\u22641000mm<\/td>\n<\/tr>\n
Coil\u00a0outer\u00a0diameter<\/td>\n80-500mm<\/td>\n80-600mm<\/td>\n80-800mm<\/td>\n<\/tr>\n
Main\u00a0axis\u00a0rotating\u00a0speed<\/td>\n0-375r\/min<\/td>\n0-220r\/min<\/td>\n0-220r\/min<\/td>\n<\/tr>\n
Speed\u00a0adjusting\u00a0method<\/td>\nStepless\u00a0speed\u00a0adjust<\/td>\n<\/tr>\n
Working\u00a0torque<\/td>\n\u2264300.M<\/td>\n<\/tr>\n
Main\u00a0axis\u00a0center\u00a0height<\/td>\n850mm<\/td>\n<\/tr>\n
Main\u00a0axis\u00a0loading<\/td>\n\u2264200kg<\/td>\n\u2264300kg<\/td>\n\u2264500kg<\/td>\n<\/tr>\n
Guiding\u00a0wire\u00a0specification<\/td>\nRound\u00a0wire\uff1a\u03c60.3-\u03c63mm<\/td>\nFlat\u00a0wire\uff1a\u22643*12mm<\/td>\n<\/tr>\n
Wire\u00a0cabling\u00a0precision<\/td>\n0.01mm<\/td>\n<\/tr>\n
Main\u00a0axis\u00a0size<\/td>\n50*50*800mm(90*50*800mm)<\/td>\n50*50*1000mm(90*50*1000mm)<\/td>\n50*50*1200mm\u00a0(90*50*1200mm)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Automatic Cabling Coil Winding Machine<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Application :<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
This equipment is used for amorphous alloy transformer HV coil winding and the same art work transformer coil winding.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Features :<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
1.<\/strong><\/span>Apply to round , oval , rectangle shape coil winding<\/p>
2.<\/strong><\/span>Adopting PLC control , touch screen human – machine interface<\/p>
3.<\/strong><\/span>Automatic cabling device is servo motor driving, precise ball screw and line guide as direction guide<\/p>
4.<\/strong><\/span>Wire supplying use cylinder buffering structure, oval and rectangle coil winding problem can be solved effectively.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Equipment Composition:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
1.<\/strong> <\/span>Main machine<\/p>
2.<\/strong> <\/span>Automatic cabling device<\/p>
3.<\/strong> <\/span>Interlayer insulation paper device<\/p>
4.<\/strong> <\/span>Wire supplying race<\/p>
5.<\/strong><\/span> Control system<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Technical Parameters:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\n\n\n\n\n\n\n\n\n\n\n\n\n
Code<\/td>\nSH-600<\/td>\nSH-800<\/td>\nSH-1000<\/td>\n<\/tr>\n
Coil\u00a0height<\/td>\n\u2264600mm<\/td>\n\u2264800mm<\/td>\n\u22641000mm<\/td>\n<\/tr>\n
Coil\u00a0outer\u00a0diameter<\/td>\n80-500mm<\/td>\n80-600mm<\/td>\n80-800mm<\/td>\n<\/tr>\n
Main\u00a0axis\u00a0rotating\u00a0speed<\/td>\n0-375r\/min<\/td>\n0-220r\/min<\/td>\n0-220r\/min<\/td>\n<\/tr>\n
Speed\u00a0adjusting\u00a0method<\/td>\nStepless\u00a0speed\u00a0adjust<\/td>\n<\/tr>\n
Working\u00a0torque<\/td>\n\u2264300.M<\/td>\n<\/tr>\n
Main\u00a0axis\u00a0center\u00a0height<\/td>\n850mm<\/td>\n<\/tr>\n
Main\u00a0axis\u00a0loading<\/td>\n\u2264200kg<\/td>\n\u2264300kg<\/td>\n\u2264500kg<\/td>\n<\/tr>\n
Guiding\u00a0wire\u00a0specification<\/td>\nRound\u00a0wire\uff1a\u03c60.3-\u03c63mm<\/td>\nFlat\u00a0wire\uff1a\u22643*12mm<\/td>\n<\/tr>\n
Wire\u00a0cabling\u00a0precision<\/td>\n0.01mm<\/td>\n<\/tr>\n
Main\u00a0axis\u00a0size<\/td>\n50*50*800mm(90*50*800mm)<\/td>\n50*50*1000mm(90*50*1000mm)<\/td>\n50*50*1200mm\u00a0(90*50*1200mm)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Foil Winding Machine<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Application :<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
This equipment is mainly used in all kinds of foil winding in transformer and reactor. welding method have ti welding and cold pressure welding.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Features :<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
1.<\/strong> <\/span>Adopting motor initiative supplying tension advanced method , stable tension , there is stable tension in foil winding, stopping and foil returning . It can avoid loosen situation when the tension lost in winding.<\/p>
2.<\/strong><\/span>Winding speed reducer is turbine shaft reducer , it can keep main shaft auto – locked whenever power on or power off status.<\/p>
3.<\/strong><\/span>Correction system using photoelectric analog sensors , it is not meeting with foil edge , both thick and thin foil are accepted .<\/p>
4.<\/strong><\/span>Foil tension, layer insulation tension, coil parameters , winding status and other data , all of them can be set and showed on screen, easy for operating, accurately and intuitively.<\/p>
5.<\/strong><\/span>Equipment is controlled by PLC and touch screen, less fault of whole machine, no friction noisy, stable working, high working efficiency<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Equipment Composition:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
1.<\/strong> <\/span>Main machine<\/p>
2.<\/strong> <\/span>Foil belt decoiling device<\/p>
3.<\/strong> <\/span>Foil feeding device<\/p>
4.<\/strong> <\/span>Layer decoiling device<\/p>
5.<\/strong> <\/span>Automatic welding device<\/p>
6.<\/strong><\/span> Foil burr remove device<\/p>
7.<\/strong> <\/span>Winding pressing roller device<\/p>
8.<\/strong> <\/span>Foil material clean device<\/p>
9.<\/strong> <\/span>Foil belt auto- correction device<\/p>
10.<\/strong> <\/span>Foil belt shearing machine<\/p>
11.<\/strong><\/span> End insulation device<\/p>
12.<\/strong><\/span>TIG auto- correction device<\/p>
13.<\/strong> <\/span>TIG machine cold water box<\/p>
14.<\/strong><\/span>Electric control system<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Technical Parameters:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\u00a0Code<\/td>SH-600<\/td>SH-800<\/td>SH-1100<\/td>SH-1400<\/td><\/tr>
\u00a0Coil outer diameter<\/td>150-750mm<\/td>150-850mm<\/td>200-1000mm<\/td>200-1000mm<\/td><\/tr>
\u00a0Foil width<\/td>100-600mm<\/td>150-800mm<\/td>200-1100mm<\/td>300-1400mm<\/td><\/tr>
\u00a0Foil layers<\/td>Single or double<\/td><\/tr>
\u00a0Foil thickness<\/td>Cu:0.3-2.5mm Al: 0.5-3.0mm<\/td><\/tr>
\u00a0Winding speed<\/td>0-30r\/min<\/td>0-30r\/min<\/td>0-20r\/min<\/td>0-20r\/min<\/td><\/tr>
\u00a0Max tension of foil<\/td>6000N<\/td>8000N<\/td>10000N<\/td>14000N<\/td><\/tr>
\u00a0Welding speed<\/td>0-0.5\u00a0m\/min<\/td><\/tr>
\u00a0Correction precision<\/td>\u00b10.5mm<\/td><\/tr>
\u00a0Welding method<\/td>TIG or cold pressure welding<\/td><\/tr><\/tbody><\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t
\n\t\t
\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Silicon Plate CNC Slitting Line<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Application :<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
This equipment is dedicated machine for silicon plate coil cutting to length. It is suitable for silicon plate coil slitting in transformer, motor, current transformer, etc.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Features :<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
1.<\/strong><\/span>All line adopts electric, hydraulic, pneumatic control. It is easy to operate and has high production efficiency.<\/p>
2.<\/strong><\/span>Adopting PLC controller. The speed of the whole line is synchronous and the machine runs stably.<\/p>
3.<\/strong><\/span>Adopting high rigidity and high precision slitting machine and winding machine to assure the slitting quality.<\/p>
4.<\/strong><\/span>Uncoiling, slitting and winding speed matching automatically. all line works automatically<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Equipment Composition:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
1.<\/strong><\/span> Decoiler<\/p>
2.<\/strong><\/span> Decoiling buffering rack<\/p>
3.<\/strong> <\/span>Slitting guide rack<\/p>
4.<\/strong><\/span>Rolling shearing machine<\/p>
5.<\/strong><\/span> Buffering device<\/p>
6.<\/strong> <\/span>Automatic roll up and swing lever<\/p>
7.<\/strong> <\/span>Tension table<\/p>
8.<\/strong> <\/span>Recoiler<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Technical Parameters:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\u00a0Code<\/td>SH-1000<\/td>SH-1250<\/td><\/tr>
\u00a0Material roll inner<\/td>500mm<\/td>500mm<\/td><\/tr>
\u00a0Material roll width<\/td>1000mm<\/td>1250mm<\/td><\/tr>
\u00a0Material roll weight<\/td>5T<\/td>8T<\/td><\/tr>
\u00a0Material thickness<\/td>0.20-0.5mm<\/td>0.20-0.5mm<\/td><\/tr>
\u00a0Slitting width<\/td>40-1000mm<\/td>40-1250mm<\/td><\/tr>
\u00a0Slitting speed<\/td>0-60m\/min;\u00a00-90m\/min;\u00a00-150m\/min;<\/td><\/tr>
\u00a0Slitting width error<\/td>\u00b10.1mm<\/td>\u00b10.1mm<\/td><\/tr>
\u00a0Slitting burr<\/td>\u22640.02mm<\/td>\u22640.02mm<\/td><\/tr>
\u00a0Max. Slitting strips<\/td>10<\/td>12<\/td><\/tr>
\u00a0Straightness deviation<\/td>\u22640.2mm\/m<\/td>\u22640.2mm\/m<\/td><\/tr>
\u00a0Installing power<\/td>35kw\/55kw\/85kw<\/td>45kw\/65kw\/100kw<\/td><\/tr><\/tbody><\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Silicon Plate Cnc Cut To Length Line<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Application :<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
This equipment is dedicated machine for transformer steel core manufacture.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Features :<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
1.<\/strong><\/span>Adopting imported controller and AC servo control system.<\/p>
2.<\/strong><\/span>Equipment is center location, width is adjusted automatically by computer.<\/p>
3.<\/strong><\/span>Equipment can make step feeding automatically from 1 to 7 grade in horizontal and vertical direction.<\/p>
4.<\/strong><\/span>All servo motor are imported servo motor in foil feeding , punching and shearing , guide , etc.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Equipment Composition:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
1.<\/strong> <\/span>Double head uncoiling machine<\/p>
2.<\/strong> <\/span>Buffering device<\/p>
3.<\/strong> <\/span>Feeding measure device<\/p>
4.<\/strong> <\/span>O- type punching<\/p>
5.<\/strong> <\/span>V- type punching<\/p>
6.<\/strong> <\/span>+45\u00b0Shearing machine<\/p>
7.<\/strong> <\/span>-45\u00b0Shearing machine<\/p>
8.<\/strong> <\/span>Material dividing and transporting device<\/p>
9.<\/strong> <\/span>Automatic material feeding device<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Technical Parameters:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\u00a0Code<\/td>SH-300<\/td>SH-400<\/td>SH-600<\/td>SH-900<\/td><\/tr>
\u00a0Shearing width<\/td>40-300mm<\/td>40-440mm<\/td>60-640mm<\/td>90-920mm<\/td><\/tr>
\u00a0Shearing length<\/td>300-2000mm<\/td>300-2500mm<\/td>400-3500mm<\/td>500-5000mm<\/td><\/tr>
\u00a0Shearing thickness<\/td>0.20-0.35mm<\/td><\/tr>
\u00a0Shearing length precision<\/td>\u00b10.1mm<\/td><\/tr>
\u00a0Slitting burr<\/td>\u22640.02mm<\/td><\/tr>
\u00a0Shearing angle precision<\/td>\u00b10.025\u00b0<\/td><\/tr>
\u00a0Slitting width error<\/td>\u00b10.025\u00b0<\/td><\/tr>
\u00a0Slitting burr<\/td>\u22640.02mm<\/td><\/tr>
\u00a0Max feeding speed<\/td>250m\/min<\/td>200m\/min<\/td><\/tr>
\u00a0Sorting out method<\/td>\u00a0Automatic sorting out<\/td><\/tr>
\u00a0Hold punching diameter<\/td>\u00a0According to requirement<\/td><\/tr>
\u00a0Locating method<\/td>\u00a0Center locating<\/td><\/tr>
\u00a0Installing capacity<\/td>25kw<\/td>30kw<\/td>35kw<\/td>70kw<\/td><\/tr><\/tbody><\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t
\n\t\t
\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Amorphous Alloy Core Cutting Line<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Application :<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
It is used for automatic cutting and stacking of amorphous alloy transformer core.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Features :<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
1.<\/strong><\/span>Adopting AC servo system for length setting and feeding, high precision.<\/p>
2.<\/strong><\/span>Automatic sizing of uncoiling machine, convenient and efficient for material loading.<\/p>
3.<\/strong><\/span>Adopting PLC touch screen, convenient to input plate shape parameters.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Equipment Composition:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
1.<\/strong> <\/span>Uncoiling machine<\/p>
2.<\/strong> <\/span>Coil material buffering device<\/p>
3.<\/strong> <\/span>Material feeding device<\/p>
4.<\/strong><\/span> Cutting device<\/p>
5.<\/strong> <\/span>Automatic stacking device<\/p>
6.<\/strong> <\/span>Electric control<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Technical Parameters:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\u00a0Code<\/td>SH-200<\/td><\/tr>
\u00a0Shearing width<\/td>140-230mm<\/td><\/tr>
\u00a0Feeding speed<\/td>60m\/min<\/td><\/tr>
\u00a0Shearing length<\/td>300-3000mm<\/td><\/tr>
\u00a0Shearing length precision<\/td>\u58eb0.5mm<\/td><\/tr>
\u00a0Shearing angle<\/td>90\u00b0<\/td><\/tr>
\u00a0Shearing angle precision<\/td>\u58eb0.025<\/td><\/tr>
\u00a0Shearing thickness<\/td>Each layer 0.023mm, Max 15 layers<\/td><\/tr>
\u00a0Stacking thickness<\/td>180mm<\/td><\/tr>
\u00a0Stacking position error<\/td>\u58eb0.5mm<\/td><\/tr>
\u00a0Length of the loading platform<\/td>2000mm<\/td><\/tr>
\u00a0Coil outer diameter<\/td>\u03c61100mm<\/td><\/tr>
\u00a0Coil inner diameter<\/td>\u03c6400mm<\/td><\/tr><\/tbody><\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Amorphous Transformer Body Assembly Worktable<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Application :<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
This equipment is dedicated for amorphous alloy transformer body assembly. It is available for all types of oil and dry amorphous transformer assembly.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Features :<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
1.<\/strong><\/span>It changes traditional transformer body assembly art. Wire group is placed on the lifting table of assembly in advance. Axis of wire group is horizontal. Each single steel core inserts wire group inner hole horizontally.<\/p>
2.<\/strong><\/span>Iron core close, wrapping and sealing, transformer body insulation assembly, clamping device fastening and other works are all finished in assembly worktable.<\/p>
3.<\/strong><\/span>This assembly worktable height can be adjusted conveniently and meet with different types transformer assembly<\/p>
4.<\/strong><\/span>After assembly, transformer body can make 90\u00b0turning. It is lifted convenient, no deformation and safely.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Equipment Composition:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
1.<\/strong> <\/span>Hydraulic lifting platform<\/p>
2.<\/strong> <\/span>Assembly platform<\/p>
3.<\/strong><\/span> 90\u00b0turning device<\/p>
4.<\/strong> <\/span>Hydraulic station<\/p>
5.<\/strong><\/span> Hydraulic car<\/p>
6.<\/strong> <\/span>Electric control cabinet<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Technical Parameters:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\n\n\n\n\n\n\n\n\n
\u00a0Code<\/td>\n \n\nSH-3T<\/td>\n \n\nSH-5T<\/td>\n<\/tr>\n
 \n\nLoading<\/td>\n \n\n3T<\/td>\n \n\n5T<\/td>\n<\/tr>\n
 \n\nWorking height<\/td>\n \n\n850mm<\/td>\n<\/tr>\n
 \n\nWorking stroke<\/td>\n \n\n500mm<\/td>\n \n\n600mm<\/td>\n<\/tr>\n
 \n\nTransformer body size using<\/td>\n \n\nlength:700-1600mm Width:200-900mm Height:200-900mm<\/td>\n<\/tr>\n
 \n\nLifting speed(adjustable)<\/td>\n \n\nV=40mm\/s<\/td>\n<\/tr>\n
 \n\nWorking pressure<\/td>\n \n\nP=14MPa<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t
\n\t\t
\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Iron Core Overturning Worktable<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Application :<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
It is used for transformer iron core stacking and overturning.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Features :<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
1.<\/strong><\/span>Hydraulic overturning, stable and reliable during working<\/p>
2.<\/strong><\/span>It has high precision mechanical structure and operates safety<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Equipment Composition:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
1.<\/strong><\/span> Machine body<\/p>
2.<\/strong> <\/span>Hydraulic system<\/p>
3.<\/strong> <\/span>Electric control system<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Technical Parameters:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\n\n\n\n\n\n\n
\u00a0Code<\/td>\nSH-3T<\/td>\nSH-5T<\/td>\nSH-10T<\/td>\n<\/tr>\n
\u00a0Loading<\/td>\n3T<\/td>\n5T<\/td>\n10T<\/td>\n<\/tr>\n
Working heigh<\/td>\n850mm<\/td>\n1000mm<\/td>\n1200mm<\/td>\n<\/tr>\n
Lron core size<\/td>\nLength: 1500mm\n\nWidth: 1500mm<\/td>\nLength: 2000mm\n\nWidth: 2000mm<\/td>\nLength: 2500mm\n\nWidth: 2500mm<\/td>\n<\/tr>\n
Overturning angle<\/td>\n0-90\u00b0<\/td>\n0-90\u00b0<\/td>\n0-90\u00b0<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Vacuum Annealing Furnace<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Application :<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
Mainly used for silicon steel sheet vacuum annealing treatment, widely used in: triangular wound core, open volume recovery magnetic annealing characteristics of core, transformer core disc, plain radiographs and regeneration.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Features :<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
1.<\/strong> <\/span>Thermal annealing, compared with external thermal annealing, annealing with high efficiency, energy saving etc.<\/p>
2.<\/strong> <\/span>Horizontal annealing, installed furnace capacity, car and out of the furnace.<\/p>
3.<\/strong> <\/span>Man-machine dialogue automatic control annealing furnace, a number of annealing curve, a key operation, the entire automatic annealing, unattended.<\/p>
4.<\/strong><\/span> Internal heating type high temperature radiation heating, high thermal efficiency; nitrogen cooling, cooling fast, short cycle annealing.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Technical Parameters:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\u00a0Furnace type<\/td>\n\u00a0Horizontal signal room<\/td>\n<\/tr>\n
\u00a0Effective size of inner liner<\/td>\n1000x1100x2200mm (W)x(H)x(L)<\/td>\n<\/tr>\n
\u00a0Effective size of inner liner<\/td>\n1200x1200x2600mm Note: Max loading capacity 10000KG, Power 180KW, Vacuum machine:\n\n2X+70Pump\u00a0+150Roots\u00a0Pump,\u00a0other\u00a0technical\u00a0parameters\u00a0are\u00a0same<\/td>\n<\/tr>\n
\u00a0Max loading capacity<\/td>\n5000kg<\/td>\n<\/tr>\n
\u00a0Maximum furnace temperature<\/td>\n950\u2103\u00a0\uff08900\u2103\u00a0(800\u2103-850\u2103\u00a0is\u00a0enough\u00a0for\u00a0your\u00a0material)\uff09<\/td>\n<\/tr>\n
\u00a0Limit vacuity<\/td>\n100Pa<\/td>\n<\/tr>\n
\u00a0Pressure rising rate<\/td>\n\uff1c50Pa\/h<\/td>\n<\/tr>\n
\u00a0Air exhausting time<\/td>\n30min(Vacuum 400Mpa)<\/td>\n<\/tr>\n
\u00a0Heating power<\/td>\n120kW\u00a0\uff083\u00d740kW\uff09<\/td>\n<\/tr>\n
\u00a0Temperature uniformity<\/td>\n\u2264\u00b12\u2103(Insulation)<\/td>\n<\/tr>\n
\u00a0Temperature of furnace surface<\/td>\n+35\u2103<\/td>\n<\/tr>\n
\u00a0Temperature Points<\/td>\n3<\/td>\n<\/tr>\n
\u00a0Temperature control method<\/td>\nAutomatic by program<\/td>\n<\/tr>\n
\u00a0Operation mode<\/td>\nManual (Furnace door)<\/td>\n<\/tr>\n
\u00a0Cooling water capacity<\/td>\n(tons per hour)10\uff5e12(t)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t
\n\t\t
\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
SH-1300-400 Corrugated Fin Forming Machine<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Features :<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
1.<\/strong> <\/span>Special machine for transformer fuel tank.<\/p>
2.<\/strong> <\/span>Include de-coiler, main machine, hydraulic station and electric control box etc.<\/p>
3.<\/strong> <\/span>It has reasonable structure and operation easily.<\/p>
4.<\/strong> <\/span>The hydraulic system is automatic controlled and running stable.<\/p>
5.<\/strong> <\/span>It may complete such as forming, shearing, bending etc process within one time when you put all operation parameters at screen.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Technical Parameters:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\u00a0Name<\/td>Spec<\/td><\/tr>
\u00a0Steel Thickness<\/td>1.0~1.5\uff08mm\uff09<\/td><\/tr>
\u00a0Fin Length<\/td>300~2000\uff08mm\uff09<\/td><\/tr>
\u00a0Fin Width<\/td>300~1300\uff08mm\uff09<\/td><\/tr>
\u00a0Fin Height<\/td>40~400\u00b10.2\uff08mm\uff09<\/td><\/tr>
\u00a0Fin Pitch<\/td>42~80\u00b10.2\uff08mm\uff09<\/td><\/tr>
\u00a0Fin Pitch Tolerance<\/td>\u00b1\u00a00.2\uff08mm\uff09<\/td><\/tr>
\u00a0Working speed<\/td>3pcs\/1min<\/td><\/tr>
Machine weight<\/td>11000kg<\/td><\/tr><\/tbody><\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Corrugated Tank\/Fin Welding Machine<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Application :<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
Corrugated fin automatic welding machine is kind of professional welding machine used in transformer manufacturing industry. Use air cylinder to clamp the fins, then welding gun move from top to bottom through ball screw driven by DC speed motor and weld the fins properly. Adopted air cylinder feeding, the machine can work continuously. The whole electric circuit is controlled by PLC system and the machine could run in fully automation mode.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Features :<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
1.<\/strong> <\/span>PLC control, full automatic, automatic conveying, automatic clamping, automatic welding.<\/p>
2.<\/strong><\/span> High welding speed, much quicker than manual welding.<\/p>
3.<\/strong> <\/span>Argon arc welding, very tight welding result, very clean and smooth finished welding surface.<\/p>
4.<\/span> <\/strong>Touch screen control, operate easily.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Technical Parameters:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\n\n\n\n\n\n\n\n\n\n
\u00a0Name<\/td>\n\u00a0Spec<\/td>\n<\/tr>\n
\u00a0Fin Width<\/td>\n100\u20141300mm\u00b11mm<\/td>\n<\/tr>\n
\u00a0Fin Length<\/td>\n300\u20142000mm<\/td>\n<\/tr>\n
\u00a0Fin Thickness<\/td>\n1.0\u20141.5mm<\/td>\n<\/tr>\n
\u00a0Fin Height<\/td>\n50\u2014400\u00b11.0mm<\/td>\n<\/tr>\n
\u00a0Fin Pitch<\/td>\n45\u201480mm\u00b10.20mm<\/td>\n<\/tr>\n
\u00a0Welding speed<\/td>\n2-3\u00a0fins\/min<\/td>\n<\/tr>\n
\u00a0Machine weight<\/td>\n17000kg<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t
\n\t\t
\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t\t\t\n\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/a>\n\t\t\t\t\t\t\t\n\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/a>\n\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
3D Wound Core Transformer<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Features :<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
Core combined by three single wound core frames with the same size to form a 3D triangle<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
 Advantages :<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
1.<\/strong><\/span>Balanced magnetic circuits and exciting current in all 3 phases<\/p>
2.<\/strong><\/span>Lower no-load losses<\/p>
3.<\/strong><\/span>Reduced vibrations<\/p>
4.<\/strong><\/span>Reduced in-rush currents<\/p>
5.<\/strong><\/span>Better short circuit withstanding capability<\/p>
6.<\/strong><\/span>Reduced exciting (a.k.a. reactive or no-load) currents<\/p>
7.<\/strong><\/span>Low voice, energy saving, low cost and anti-theft<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Technical Parameters:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t\t\t\n\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/a>\n\t\t\t\t\t\t\t\n\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/a>\n\t\t\t\t\t\t\t\n\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/a>\n\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Stacked Core Transformer<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t\t\t\n\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/a>\n\t\t\t\t\t\t\t\n\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/a>\n\t\t\t\t\t\t\t\n\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/a>\n\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Advantages :<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
1.<\/strong><\/span>Easy assembly. Range no standard range of design exists due to the diversity of design requirements.<\/p>
2.<\/strong><\/span>The materials magnetic properties are recover by annealing in nitrogen furnace. We produce single phase cores ranging from 10KVAto 5000KVA, and the three-phase cores ranging from 10KVAto 40MVA.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
R-type Iron Core Transformer<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t\t\t\n\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/a>\n\t\t\t\t\t\t\t\n\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/a>\n\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Application :<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
Widely used in single-phase or three-phase S11, S13 distribution transformers.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Advantages :<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
It is an environmental and energy – saving products. With different widths and multi-layer symmetrical winding, the cross section is approximately circular in the symmetrical step.The coil is directly wind on the core which can reduce the length of the coil. The magnetic circuit is completely closed and no leakage flux. Efficiency of R-Core Transformer is usually more<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Production Process<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
3D Wound Core Transformer Production Process<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"
Transformer Production Line Transformer Production Line 3D Wound Core Manufacture Machine \/ A morphous Alloy Core Manufacture Machine \/ Silicon Steel Cutting Machine https:\/\/www.youtube.com\/watch?v=mrjo5lFDc1s Three-dimensional Triangle Wound Core Structure and Advantages Optimization of magnetic circuit : 1.There is no joint between the three dimensional volume of the core layer, uniform distribution of the magnetic circuit. […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-1895","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.smac.com.cn\/index.php\/wp-json\/wp\/v2\/pages\/1895","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.smac.com.cn\/index.php\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.smac.com.cn\/index.php\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.smac.com.cn\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.smac.com.cn\/index.php\/wp-json\/wp\/v2\/comments?post=1895"}],"version-history":[{"count":67,"href":"https:\/\/www.smac.com.cn\/index.php\/wp-json\/wp\/v2\/pages\/1895\/revisions"}],"predecessor-version":[{"id":2005,"href":"https:\/\/www.smac.com.cn\/index.php\/wp-json\/wp\/v2\/pages\/1895\/revisions\/2005"}],"wp:attachment":[{"href":"https:\/\/www.smac.com.cn\/index.php\/wp-json\/wp\/v2\/media?parent=1895"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}